ARB Europe | RAISING THE BAR

Actualités

NOUS METTONS LA BARRE PLUS HAUT

2 novembre, 2021

NOUS METTONS LA BARRE PLUS HAUT - La nouvelle barre LED Intensity ARB

LA CÉLÈBRE BARRE LED ARB A ÉTÉ REVISITÉE ET REPOUSSE À NOUVEAU LES LIMITES TECHNOLOGIQUES DES FEUX DE ROUTE.

Votre sécurité et celle des autres dépendent de votre éclairage. Les barres LED Intensity V2 ARB sont ce qu’il se fait de mieux. Ce sont des barres haute performance conçues en Australie pour les conditions les plus extrêmes. Elles sont fabriquées aux États-Unis.

The new V2 Intensity LED Light Bar uses the same optimal chassis design of the previous light bar, yet it is what’s inside that counts. Incorporating the latest in LED technology using OSRAM GIANTS and advanced optics via the latest Hyperspot™ technology, the Intensity V2 Light Bar’s combo configuration drives light further down the road whilst spreading the light in front of the vehicle. This is only achieved by the clever design of having both dedicated flood and spot optics combined into the one bar.

HYPER-WHAT TECHNOLOGY?
Hyperspot™ is a refined optic used to focus and intensify light output. Whilst pumping a huge amount of power into a light and getting great distances down the road is all well and good, if there is no control and focus to the areas required for the human eye to see, that power is ultimately wasted. Hyperspot™ technology sends the light at amazing distances down the road while not only keeping the clarity of the beam but also controlling the beam pattern to ensure it is lighting up the correct areas on the road and not spilling light into the flood configuration’s territory.

GIANT OUTPUT
Another upgrade to the Intensity V2 Light Bar is the LEDs, which have been changed to use OSRAM GIANTS, a large LED chip that boasts an amazing light output. OSRAM GIANTS can drive tonnes of power into the LED, pushing the Intensity V2 Light Bar’s power to 305 watts, and that’s without even maxing out the LED! This produces a massive 25,080 lumens of raw light output, which requires precision engineering to ensure the power is harnessed and used effectively.

WITH GREAT POWER…
…comes great responsibility. In order to harness the increased power, the Intensity V2 Light Bar power draw requires a new loom. The new loom needed to incorporate high-current wiring and components that were able to handle up to 30 amps. Designing this loom to handle such power meant that increased safety measures needed to be considered, especially around temperature and voltage/current requirements.
Coupled to the new Intensity V2 Light Bar loom is the two-tow pin DTP connector with updated over-moulded connector, all protected by midi fuse and spike-protected relays. Another update is the plug-and-play H4 and HB3 waterproof connectors, which ensure a smoother fit and install.

THERMAL MANAGEMENT
Active thermal management of the temperature created by LEDs has always been a feature of the ARB Intensity range. The powder-coated aluminium extruded body acts as a massive heat sink, maximising cooling and allowing the quick dissipation of heat from the LEDs, which keeps them running at maximum performance.

NO LUX ABOUT IT
The Intensity V2 Light Bar provides an impressive 926 metres at one lux, which is a 53% increase in light performance from the previous Intensity combo bar. The flood component spreads light at a massive 40 metres across the front of your car; that’s almost half a football field wide.
But there is so much more to effective and quality light than its lux measurement. The Intensity V2 Light Bar has been updated to improve the warmness of the light output, which helps reduce eye strain over long driving periods and which in turn improves driver comfort and reduces the risk of fatigue.

THE RANGE
With so many LED lighting options on the market, choosing the right one for your 4WD can seem daunting. Instead of confusing you with hundreds of options, ARB has designed an uncomplicated range of driving lights that perform so well, regardless of their shape or size, you can simply choose your budget range and what you think looks best on your 4WD.

We’re especially proud of the Intensity Solis driving lights which, again, are raising the bar of the technological development & quality of ARB products.

ARBIntensityRange_horitzontal_1500x315_v3

CARACTÉRISTIQUES ET SPÉCIFICATIONS DE LA BARRE LED ARB

• Structure extrudée et poudrée en aluminium avec embouts moulés sous pression
• Lentille en polycarbonate quasiment indestructible
• Couvercle de protection en polycarbonate résistant et durci
• 40 LED OSRAM haute performance avec une durée de vie de plus de 50 000 heures
• 24 LED Hyperspot™ et 16 LED à faisceau élargi haute performance
• Étalement de 6 degrés pour le faisceau serré et de 20 degrés pour le faisceau élargi
• 1 lux à 926 mètres
• 25,080 lumens bruts
• 21 A/14,4 V
• Température de fonctionnement de -40 à 63 °C

• Évent GORE
• Résistance aux vibrations testée suivant la norme MIL810-STDG
• Conforme à la directive RoHS
• Étanche à l’eau et à la poussière (IP68)
• Submersible jusqu’à trois mètres
• Protection contre les surtensions et sous-tensions
• Gestion thermique active intégrée
• Protection contre les interférences radio (RFI) et électromagnétiques (ETC)
• Connecteur Deutsch DTP étanche (IP69)

The Intensity V2 LED Driving Light Bar comes with a three-year warranty.

Produit n° : AR40CV2

Interrupteur Intensity Solis ARB

Pour les propriétaires de variateur Intensity Solis ARB n’ayant pas besoin de la fonction de variation pour leurs feux de route, ARB propose désormais un interrupteur sans variation et un câblage Plug-and-Play. Disponible sous la forme d’un bouton ou d’un interrupteur basculant pour s’adapter à l’esthétique particulière de votre véhicule, l’interrupteur Intensity Solis se loge dans un espace pour interrupteur libre. Il n’est donc pas nécessaire de découper ou percer le tableau de bord. Le câblage est la seule manière de contourner la fonction variateur Intensity Solis. L’activation de l’interrupteur allume vos feux Intensity Solis à 100 % de leur luminosité.