ISUZU D-MAX SUSPENSION

The 2021 on Isuzu D-MAX is a medium-sized utility vehicle suited to both commercial and recreational uses. During development, OME engineers focussed on increasing ride height and load-carrying capability whilst improving comfort, control and ride quality on all surfaces.

A range of front springs, with matching shocks, were developed to cater for differing vehicle setups and front ride height increases of approximately 40mm were achieved. A front trim packer was developed to further fine-tune front ride heights.

Rear ride height increases of approximately 40mm maintain the factory vehicle rake and a range of rear springs, with matching shocks and greaseable shackles and pins, provide multiple options depending on the intended loads to be carried. An XL leaf has also been developed to assist with fine-tuning the weight carrying capacity and matching spring bush kits ensure ease of service and increased bush life.

POURQUOI OLD MAN EMU ?

Les systèmes de suspension, en particulier pour les 4x4, sont extrêmement complexes. Déterminer la bonne solution pour chaque 4x4 requiert une attention particulière à de nombreux facteurs, le poids étant le facteur principal. La suspension 4×4 Old Man Emu par ARB aborde ce problème de manière unique.

Plutôt que de proposer une gamme de pièces choisies principalement pour augmenter la hauteur de caisse du véhicule, la suspension 4×4 OME  propose une gamme

de systèmes réglés, adaptés et intégrés, chacun offrant des niveaux optimaux de confort, de capacité de charge et de maniabilité.

La gamme complète de suspensions Old Man Emu intègre bien plus que des amortisseurs et des ressorts 4 × 4. Chez ARB, nous poussons l’intégration au maximum avec notre propre sélection de silent blocks, de boulons en U, de boulons centraux, de brides d’alignement, d’ensembles de garniture et de kits de fixation de suspension.

NITROCHARGER SPORT

Where the purpose of a spring is to carry the load of a vehicle and its cargo, a shock absorber works to control the spring by absorbing excess energy and in doing so, has a profound impact on your vehicle’s ride and handling.

During the development of Old Man Emu’s Nitrocharger Sport shock absorbers, particular focus was placed on how well they are matched to the specific springs they’ll be controlling; with Ride Control Engineers tailoring shock absorber valving to work with the different springs in the range, often resulting in multiple shock absorber options for each vehicle.

BP-51 HIGH PERFORMANCE BYPASS SHOCK ABSORBER

A BP-51 suspension upgrade is available to suit your vehicle. Designed, developed and tested entirely in-house by ARB’s team of Old Man Emu ride engineers, BP-51 shock absorbers are engineered for each vehicle and utilise existing suspension mounting locations.

Providing unrivalled comfort and control over all surfaces, the revolutionary internal bypass design ensures there are no exposed fluid transfer channels on the exterior of the shock. This results in a design that suits existing suspension setups and offers greater longevity.

En savoir plus
haut
FrançaisEnglish