ARB Under Vehicle Protection

While bull bars, side rails and rear bars will help keep vulnerable vehicle panels free from damage, various vital components underneath your vehicle are also at risk when you drive in challenging off road terrain. Whilst most factory protection is sufficient for protecting your vehicle from stone damage, a more robust solution is required to provide protection from rocks, stumps and ruts encountered in more challenging terrain.

Vehicle specific, ARB Under Vehicle Protection sets includes protection panels which are directly bolted onto the chassis to provide protection from the ARB bull bar (if fitted) to the transfer case. ARB differential covers are also available for a range of vehicles, and have been specifically engineered to protect both the differential and the ring and pinion set from off road hazards.

 

Features

  • Designed to protect vital underbody components including steering, engine sump, transmission and transfer case (dependent on vehicle model)
  • Vehicle specific design
  • Pressed and folded 3mm laser cut steel provides more strength than folded steel alone and allows optimum strength to weight ratio
  • Securely bolted to the vehicle’s chassis providing outstanding structural integrity
  • All steel components are zinc plated and powder coated in a silver textured finish
  • Recessed mounting bolts are protected and easy to remove for vehicle servicing

ARB Diff Covers

When off-road, it is inevitable that you’ll encounter obstacles that could potentially inflict expensive damage on your differential. ARB’s differential cover provides increased protection over factory diff covers, giving you piece of mind to tackle more challenging terrain.

Each cover is manufactured from high tensile nodule iron to protect the ring and pinion set whilst comppick-upr optimised cross bracing increases the structural integrity of the entire axle.

ARB diff covers are powder coated either red or black, CNC machined, then clear coated for a durable, professional, long lasting finish.

Key Features

  • Approach/departure angle optimised by angled exterior surface
  • Prolonged carrier bearing life due to extra support to the bearing alignment
  • Additional housing strength helps keep the ring and pinion gears meshing on the flat faces of the teeth, greatly increasing ring and pinion life and overall maximum load strength
  • Top quality, high power neodymium magnets are used in both the drain plug and the dipstick to collect metallic wear particles as the vehicle moves
  • Magnet location in the end of the dipstick allows the oil to be checked for tell-tale signs of internal damage

 

  • Low profile drain plug design resists damage from obstacles
  • Combination of the high filler point and dipstick allows the oil to be checked for water contamination without having to drain the oil
  • Unique dipstick/filler cap design allows differential oil level to be adjusted for customized high driveline angles
  • All hardware is zinc-plated
  • Tensile cap screws (supplied) are recessed for protection against obstacles which might damage or loosen them

Features

5423010_v1

Sheet Steel

3mm pressed and folded sheet steel adds more strength than standard folded sheet, laser cut

Sheet Steel

3mm pressed and folded sheet steel adds more strength than standard folded sheet, laser cut

Coating

All steel components are protected with either powder coat or zinc plating

Mounting Bolts

Recessed mounting bolts are protected and easy to remove for vehicle servicing

Unique Design

Vehicle specific design

top